REGO PRV29432TP150 1/4″ SS ASME Cryogenic Relief Valve 150 PSI PTFE O2 Clean

SKU: PRV29432TP150

Weight	1 lbs
Dimensions	8 × 8 × 8 in

$599.98

In stock — available to order.

Sold individually. Each quantity ordered is one unit. Kits are one complete kit; products sold by length use the stated length unit.

Same-item volume pricing

Quantity	Unit price	Saving
1–4	$599.98	0%
5–9	$569.98	5%
10+	$539.98	10%

Estimate for this quantity before shipping. Tax display follows store settings. Existing cart quantities can increase the tier. Only one offer applies; a coupon replaces automatic pricing. For 20+ units, contact support for a quote.

Available to order.

Bulk quantity & quote

Quantity needed

Enter the total quantity you need. We will confirm availability and a quote before you order.

Need a firm ship date? Availability may include supplier stock. Confirm availability before ordering for time-sensitive work.

REGO PRV29432TP150 1/4" SS ASME Cryogenic Relief Valve 150 PSI PTFE O2 Clean

Specifications & product details

Product Details

Specification	Details
Brand	REGO
MPN	PRV29432TP150
Series	PRV29430 Series
Product Type	ASME Cryogenic Gas Pressure Relief Valve
Body Material	Stainless Steel
Inlet Connection	1/4″ Male NPT
Factory Set Pressure	150 PSIG / approx. 10.3 bar
Seat / Softgoods	PTFE (Teflon)
Drain Hole	No
Pipe-Away Adapter	No
Orifice Area	0.062 sq. in.
Overall Height	2.6 in.
Wrenching Hex	7/8 in.
Kd Value	0.686
Temperature Range	-320°F to +165°F (-196°C to +74°C)
ASME Rated	Yes
National Board Certified	Yes
Service	Cryogenic gas/vapor
Oxygen Service	O₂ cleaned

RegO’s official literature identifies the PRV29432 as the stainless-steel, 1/4″ MNPT version of its ASME PRV29430 Series, with a 2.6″ height and 0.062-sq.-in. orifice. The T designation specifies PTFE, while P denotes the no-drain-hole configuration.

Description

The REGO PRV29432TP150 is a premium stainless-steel ASME pressure relief valve designed for cryogenic oxygen and industrial-gas vapor service. It provides overpressure protection for cryogenic piping systems, liquid cylinders and mini-bulk containers where an ASME-rated relief device is required.

This particular configuration features a 1/4″ MNPT inlet, stainless-steel body, PTFE softgoods and a 150 PSIG factory set pressure. It is supplied without a drain hole and without a pipe-away adapter. The exact PRV29432TP150 configuration is also confirmed by an industrial distributor.

Key Features

150 PSIG factory-set relief pressure
1/4″ Male NPT inlet
Corrosion-resistant stainless-steel body
Stainless-steel spring/trim
PTFE seat/softgoods
ASME rated and National Board Certified
Cleaned and packaged for oxygen service per CGA G-4.1
Cryogenic temperature capability down to -320°F (-196°C)
Bubble-tight at 95% of set pressure
Full flow at 110% of set pressure
Repeatable pressure-relief performance
100% factory tested
Tamper-resistant construction
No drain hole
No pipe-away adapter
Intended for gas/vapor service

Applications

Suitable for appropriately engineered:

Liquid Oxygen (LOX) systems • Liquid Nitrogen systems • Liquid Argon systems • Cryogenic industrial-gas cylinders • Mini-bulk containers • Cryogenic piping and vapor-space applications

RegO specifies the PRV19430/PRV29430 family for oxygen and other industrial gases and cryogenic vapor-space service.

Flow Capacity

At the 150 PSIG setting, RegO’s published flow table gives an air-flow capacity of approximately 124 SCFM.

Important Safety Note

Pressure relief valves are safety-critical components. The purchaser should verify the required set pressure, material compatibility, ASME/code requirements and installation method before putting the valve into service. Maintain the original packaging/cleanliness of an O₂-cleaned valve until installation.

Product details

Part / SKU	PRV29432TP150

Package includes

REGO PRV29432TP150 1/4" SS ASME Cryogenic Relief Valve 150 PSI PTFE O2 Clean

Included components and any stated pack quantity are as described in this listing. Optional accessories shown separately are sold separately unless expressly included above.

Compatibility & part-number help

Match the manufacturer part number and equipment model to the listing. Check connection sizes, fuel type, pressure or capacity, voltage and dimensions where applicable. A similar appearance or part number alone does not confirm compatibility.

For help, send a parts inquiry with the part number, equipment model, label photos and quantity. Manufacturer documents and item-specific information, when supplied, are in the product details above.

Shipping & availability

Availability may include our inventory and supplier sources. Listed stock does not by itself confirm immediate dispatch. Ask us to confirm a ship date before ordering for time-sensitive work.

Shipping methods and charges appear at checkout where available. Freight, oversized and specially handled items may require a quote. See our Shipping Policy for processing periods, restrictions and delivery information.